Pool Tables Construction

Uniform Support Structure
Offering the utmost in style and support. Solid hardwood 6' wide-profile top rails provide an elegant furniture appearance. For an exact fit, aprons are attached at our factory utilizing a grid framework used where two 2' x 6' cross beams run the width of the table and two 2' x 6' cross beam through the length of the table. This method of construction ensures maximum stability. Rest assured, the Uniframe support system was engineered with strength and longevity in mind. Showcasing beautiful, hand-crafted solid hardwood cabinets that are reverse-grained and laminated to resist the natural tendency of wood to warp or twist. In addition, to promote a flawless installation, cabinets are assembled, pre-leveled and squared at our factory.
Diamond Sights
Exhibiting not only functionality, but form. Genuine mother-of-pearl inlayed diamond sights are an elegant compliment to all of our styles.
Support
Sporting great legs the corner system is the foundation on which everything else depends. The highest quality craftsmanship incorporates over-sized, mortised (recessed) leg connecting stop block timbers.
The Finest Slate
Promising a level playing ground. Just below the surface of every table lies the highest quality, purest, diamond-honed slate available anywhere on Earth. The three-piece, oversized one-inch (1") slate is matched, registered and diamond-honed to a flatness far exceeding the BCA's requirements creating a smooth, even and consistent playing surface on every table. The slate rests on a 3/4" slated-liner made of hardwood that is precision-cut, milled, and laminated, providing a quieter game, tighter cloth installation, and a truer playing surface that will endure the test of time.
Rail System
Offering the utmost in style and support. Solid hardwood wide-profile top rails provide an elegant furniture appearance. For an exact fit, aprons are attached at our factory. The floating nut plate secures the rail and apron to the slate bed with unyielding torque strength; allowing for exact alignment. We also use a 4 bolt system to secure the rails to the slate for maximum stability, which no other company offers. The cushions are made from Billiard Congress of America tournament-approved 100% natural gum rubber with no fillers or stabilizers added. They are molded to a k-66 profile with control-fabric backing. This backing ensures that the rubber permanently adheres to the wood and that the felt does not loosen or move, allowing for a maximum speed on each shot. Solid hardwood sub-rails are designed to deliver optimal ball response. They are reverse grained and laminated to add weight and density, thus resisting the balls impact and allowing for the cushion to absorb and react to the energy transference. In addition, the cloth relief lets the rail system securely lay flush to the slate for added symmetry as well as strength. The highest qaulity leather pockets are used with every pooltable we offer. Leather pockets are #6 cast iron and dyed for superior performance.